Home
Admin Login

Document Catalog

Component Write-Ups (1)

Customer Drawing (0)

General Letters (0)

Installation Drawings (0)

Instruction Pamphlets (0)

Parts Catalogs (0)

Repair Codes (0)

Service Instructions (0)

Technical Guides (0)

Test Codes (0)

Freight (0)

Freight and Locomotive (0)

Locomotive (1)

26-L (0)

Air Compressor (0)

Air Dryer (0)

Air Gauge (0)

Angle Cock (0)

ATR (0)

Ball Valves (0)

BMB-60 (0)

Brake Caliper (0)

Brake Control Unit (0)

Brake Cylinder (0)

Brake Disk (0)

Brake Valve (0)

Cartridge (0)

CCB1 (0)

CCB26 (0)

CCB27 (0)

CCBI (0)

CCBII (0)

CCBIIe (0)

CCBII-IR (1)

CCBII-P (0)

CCB-IR (0)

Check Valve (0)

Control Valve (0)

Couplers (0)

DB-60 (0)

Dirt Collector (0)

Electrical Component (0)

Emergency Portion (0)

Empty Load (0)

EP-60 (0)

Filter (0)

Fittings (0)

Fittings/ Handbrake (0)

Handbrake (0)

Hose (0)

LEADER (0)

Oil Free Compressor (0)

Pressure Switch (0)

Reduction Relay Valve (0)

Relay Valve (0)

Reservoir (0)

Retainer (0)

Safety Valve (0)

Service Portion (0)

Single Car Test Device (0)

Slack Adjuster (0)

Test Rack (0)

Tread Brake Unit (0)

Truck Mounted Brake (0)

Valve (0)

Vent Valve (0)

Displaying 1 document. Found 1 exact match.
CW-337
Applies to 790054, Locomotive, CCBII-IR
Component Write-Ups
Displaying 1 document. Found 1 exact match.

Glossary

CW = Component Write - Up: Detailed description of the product, it's purpose, and how it operates.
GL = General Letter: Notifies customers of important information regarding products; such as change in hardware or operating procedures in the field.
INSTL = Installation Drawing: Provides a pictorial representation and basic information about a product.
IP = Instruction Pamphlet: End user instructions for installation, operation, and troubleshooting. May include detailed installation information not already covered by an installation drawing.
NYR = Repair Code: Step-by-step instructions for disassembly, cleaning, inspection, repair, routine maintenance, and mandatory configuration upgrades.

NYS = Service Instruction: Step-by step Instructions for disassembly, cleaning, inspection, performing conversions, upgrades, and reconditioning.
NYT = Test Codes: Listing of the key features and benefits of the product along with available options and modifications.
PC = Parts Catalog: Detailed listing of parts including part number, drawing number, item description, and parts replacement schedule.
TG = Technical Guide: Step-by-step procedure to set up and test the product.